rescue-usb/usbcreator.sh

#!/bin/bash
#Check for root
if [[ $EUID -ne "0" ]]
then
  echo "You must be root - try:   sudo $0 or sudo bash $0"
  exit 1
fi

#check for wipefs
command -v wipefs >/dev/null 2>&1 || { echo >&2 "I require wipefs but it's not installed.  Aborting."; exit 1; }

script="$0"
basename="$(dirname $script)"
DIR="/home/temp/smrusb"

#Warn user that this will detroit the things
echo "This will destroy all data and partitions on the device name you enter without further warning!!"

#get device name
echo "Please enter the device you wish to use (/dev/sdX):"
read dev
device=${dev}1

echo "Unmounting $device Partitions..."
for part in $dev*
  do umount $part > /dev/null 2>&1
done
#umount $device
DD="${device:0:7}"
if [ "$DD" == "/dev/sd" ];
then
  echo ""
else
  echo "Bad device - must start with /dev/sd"
  exit 1
fi

if [ ${device:8:1} == 0 ]
then
  echo "Bad Partition! should end in the number 1 or 2 - e.g. /dev/sdc1"
  exit1
fi

#format device

echo "Partitioning: $dev"
read -p "Proceed with partitioning (y/n): " opinion2
if [[ $opinion2 == 'y' ]] || [[ $opinion2 == 'yes' ]]

then

  #umount $device  > /dev/null 2>&1
  label="RESCUE-USB"

  ##Remove existing data/partitions
  echo "Removing existing partitions and data from $dev..."
  #dd if=/dev/zero of=$dev bs=512 count=1 conv=notrunc > /dev/null 2>&1
  wipefs -a $dev > /dev/null 2>&1

  ##Create partition table
  echo "Creating partition table..."
  parted $dev --script -- mklabel msdos > /dev/null 2>&1

  ##Create partitions
  echo "Creating partitions on $device..."
  parted $dev --script -- mkpart primary 0% 90% > /dev/null 2>&1
  parted $dev --script -- mkpart primary 91% 100% > /dev/null 2>&1

  #Create /home/temp if it doesn't exist
  echo "Creating working directory of $DIR..."
  mkdir -p $DIR

  #Fetch Easy2Boot
  echo "Fetching Easy2Boot..."
  wget -O $DIR/E2B.zip "http://files.sysres.liquidweb.com/usbkey/smrusb-4-0/Easy2Boot_v1.93A.zip" > /dev/null 2>&1

  #Extract it
  echo "Extracting Easy2Boot..."
  unzip -d $DIR/ $DIR/E2B.zip > /dev/null 2>&1

  #Remove the zip
  echo "Removing Easy2Boot zip..."
  rm -f $DIR/E2B.zip > /dev/null 2>&1

  echo "Formatting primary partition..."
  #Run E2B's fmt.sh
  /sbin/mkfs.vfat -F32 -n "$label" $device > /dev/null 2>&1
  ptn=${device: -1}
  echo Making partition "$ptn" active using parted...
  sudo parted -s ${device%?} set $ptn boot on > /dev/null 2>&1
  sleep 2
  sync
  sleep 5

  echo "Mounting $device as /mnt/myusb"
  mkdir -p /mnt/myusb 2>/dev/null
  mount $device /mnt/myusb > /dev/null 2>&1


  echo "Installing grub4dos to MBR"
  chmod +rwx $DIR/_ISO/docs/linux_utils/bootlace.com > /dev/null 2>&1
  $DIR/_ISO/docs/linux_utils/bootlace.com --time-out=0 ${device%?} > /dev/null 2>&1
  echo "Installing grub4dos to PBR"
  $DIR/_ISO/docs/linux_utils/bootlace.com --floppy=1 $device > /dev/null 2>&1

  echo "Copying $DIR to /mnt/myusb..."
  cp -r -i  $DIR/* /mnt/myusb > /dev/null 2>&1

  #Fetch ISOs to device
  echo "Copying ISOs from files.sysres to the USB..."
  pushd /mnt/myusb/_ISO/MAINMENU/ > /dev/null 2>&1
  wget -nd -e robots=off -r --no-parent /mnt/myusb/_ISO/MAINMENU/ http://files.sysres.liquidweb.com/iso/for-usb/ --reject index.htm* > /dev/null 2>&1
  wget -nd -e robots=off -r --no-parent /mnt/myusb/_ISO/MAINMENU/ http://repo.win.liquidweb.com/tools/WinPE_Fixer.iso --reject index.htm* > /dev/null 2>&1
  popd > /dev/null 2>&1

  #Use E2B's defragger
  echo "Defragmenting the drive and ISOs..."
  chmod +x $DIR/_ISO/docs/linux_utils/defragfs > /dev/null 2>&1

  $DIR/_ISO/docs/linux_utils/defragfs /mnt/myusb -f > /dev/null 2>&1
  #mount WinPE iso to copy /tools dir
  echo "Mounting WinPE ISO and copying tools directory..."
  mkdir $DIR/isomount > /dev/null 2>&1
  mount -o loop /mnt/myusb/_ISO/MAINMENU/WinPE_Fixer.iso $DIR/isomount > /dev/null 2>&1

  #copy tools dir
  cp -r $DIR/isomount/tools /mnt/myusb/ > /dev/null 2>&1

  #unmount ISO
  umount $DIR/isomount > /dev/null 2>&1

  #Get files to Update Menu settings
  echo "Fetching menu config files..."
  wget -O /mnt/myusb/_ISO/menu_defaults.txt http://files.sysres.liquidweb.com/usbkey/smrusb-4-0/menu_defaults.txt > /dev/null 2>&1
  wget -O /mnt/myusb/_ISO/MyE2B.cfg http://files.sysres.liquidweb.com/usbkey/smrusb-4-0/MyE2B.cfg > /dev/null 2>&1

  #Get background
  #wget -O /mnt/myusb/_ISO/mybackground.bmp http://files.sysres.liquidweb.com/usbkey/smrusb-4-0/mybackground.bmp > /dev/null 2>&1

  #Remove working dir
  echo "Removing working directory..."
  rm -rf $DIR > /dev/null 2>&1

  #unmount drive
  echo "Unmounting drive..."
  sleep 20
  umount $dev* > /dev/null 2>&1
  umount /mnt/myusb > /dev/null 2>&1

  #remove mountpoint
  echo "Removing mountpoint..."
  rm -r /mnt/myusb > /dev/null 2>&1

  #Complete
  echo "Script completed, your USB has been created!"

  exit 1

else

  echo "You said no, stopping."
  exit 1

fi